| Availability: | |
|---|---|
| Quantity: | |
The AJJO-OG JIC Male 74° Cone / SAE Adjustable O-Ring Seal Run Tee is a hydraulic adapter designed for three-way pipeline connections. It combines JIC male 74° cone connections with an SAE adjustable O-ring seal connection, providing a practical solution for hydraulic systems using different connection interfaces.

The JIC ends feature 74° cone connections, while the adjustable SAE end uses an O-ring sealing arrangement for connection to a compatible port. The adjustable design allows the fitting to be positioned during installation to suit the required pipeline orientation.
The AJJO-OG series is available in a wide range of inch thread combinations, with corresponding O-ring specifications for different sizes. The G thread end is designed to fit ISO 11926-1 ports.
Run tee configuration for three-way hydraulic pipeline connections.
JIC male 74° cone connections.
SAE adjustable O-ring seal connection.
Adjustable installation orientation for pipeline alignment.
Multiple inch thread combinations and O-ring sizes available.
G thread end compatible with ISO 11926-1 ports.
| 代 号 PART NO. | 螺 纹 THREAD | O形圈 O-RING | 尺 寸 DIMENSIONS | |||||||||||
| E | F | G | G端 | A | B | C | S1 | S2 | ||||||
| AJJO-04OGZ | 7/16"X20 | 7/16"X20 | 7/16"X20 | O904 | 24.5 | 24.5 | 27.2 | 11 | 17 | |||||
| AJJO-04-04-06OGZ | 7/16"X20 | 7/16"X20 | 9/16"X18 | O906 | 26.5 | 26.5 | 31.5 | 14 | 19 | |||||
| AJJO-05OGZ | 1/2"X20 | 1/2"X20 | 1/2"X20 | O905 | 26.6 | 26.6 | 29 | 14 | 17 | |||||
| AJJO-05-05-04OGZ | 1/2"X20 | 1/2"X20 | 7/16"X20 | O904 | 26.6 | 26.6 | 30 | 14 | 17 | |||||
| AJJO-06OGZ | 9/16"X18 | 9/16"X18 | 9/16"X18 | O906 | 26.9 | 26.9 | 31.8 | 14 | 19 | |||||
| AJJO-06-06-04OGZ | 9/16"X18 | 9/16"X18 | 7/16"X20 | O904 | 26.9 | 26.9 | 30.1 | 14 | 17 | |||||
| AJJO-06-06-05OGZ | 9/16"X18 | 9/16"X18 | 1/2"X20 | O905 | 26.9 | 26.9 | 30 | 14 | 17 | |||||
| AJJO-06-06-08OGZ | 9/16"X18 | 9/16"X18 | 3/4"X16 | O908 | 30 | 30 | 37.5 | 19 | 24 | |||||
| AJJO-08OGZ | 3/4"X16 | 3/4"X16 | 3/4"X16 | O908 | 33 | 33 | 36.8 | 19 | 24 | |||||
| AJJO-08-08-06OGZ | 3/4"X16 | 3/4"X16 | 9/16"X18 | O906 | 32 | 32 | 33.5 | 19 | 19 | |||||
| AJJO-08-08-10OGZ | 3/4"X16 | 3/4"X16 | 7/8"X14 | O910 | 34.8 | 34.8 | 44 | 22 | 27 | |||||
| AJJO-10OGZ | 7/8"X14 | 7/8"X14 | 7/8"X14 | O910 | 37.8 | 37.8 | 44 | 22 | 27 | |||||
| AJJO-10-10-08OGZ | 7/8"X14 | 7/8"X14 | 3/4"X16 | O908 | 37.8 | 37.8 | 39.5 | 22 | 24 | |||||
| AJJO-12OGZ | 1.1/16"X12 | 1.1/16"X12 | 1.1/16"X12 | O912 | 44.2 | 44.2 | 51 | 27 | 32 | |||||
| AJJO-12-12-08OGZ | 1.1/16"X12 | 1.1/16"X12 | 3/4"X16 | O908 | 44.2 | 44.2 | 43 | 27 | 24 | |||||
| AJJO-12-12-10OGZ | 1.1/16"X12 | 1.1/16"X12 | 7/8"X14 | O912 | 44.2 | 44.2 | 49 | 27 | 27 | |||||
| AJJO-16OGZ | 1.5/16"X12 | 1.5/16"X12 | 1.5/16"X12 | O916 | 48.8 | 48.8 | 54.5 | 33 | 41 | |||||
| AJJO-16-16-12OGZ | 1.5/16"X12 | 1.5/16"X12 | 1.1/16"X12 | O912 | 49 | 49 | 56 | 33 | 32 | |||||
| AJJO-20OGZ | 1.5/8"X12 | 1.5/8"X12 | 1.5/8"X12 | O920 | 55.3 | 55.3 | 59 | 41 | 50 | |||||
| AJJO-24OGZ | 1.7/8"X12 | 1.7/8"X12 | 1.7/8"X12 | O924 | 62.5 | 62.5 | 63 | 48 | 55 | |||||
| AJJO-32OGZ | 2.1/2"X12 | 2.1/2"X12 | 2.1/2"X12 | O932 | 78.5 | 78.5 | 76.5 | 63 | 70 | |||||
| 注:G螺纹端与ISO 11926-1油口匹配使用。 Note: G thread end fit with ISO11926-1 port. | ||||||||||||||
The AJJO-OG run tee is suitable for hydraulic systems requiring three-way connections with JIC and SAE interfaces, including:
Industrial hydraulic pipeline systems
Hydraulic machinery and equipment
Hydraulic power units
Hydraulic circuit branching and line connections
Equipment using SAE O-ring port connections
content is empty!